aj1701
Champion
I'm building my own hitbox like controller (well, with help from a friend). I got the layout I wanted, which is similar to the Hitbox layout for the directions but with the Mortal Kombat 3 attack button configuration.
I have two layouts, both made with MS Visio 2007. One has all 24mm button holes, except up which is 30mm. That ended up feeling too small for me, so there's also one where all the button holes are 30mm, which is what mine will be.
The panel is 10"x16", when you print you can print on the standard size 11"x17". A black border shows you the actual 10x16. Please note that the diagram is US Imperial, so the button sizes are approximate! If you drill, use an actual 24mm or 30mm bit. Otherwise though the center markers should line up fine (I tried really hard to make the measurements exactly match the MK configuration). Also, the directions are in comfortable position for me, you should probably print and see if it works for you.
If someone uses this let me know; I'd love to see how the controller turns out!
I have two layouts, both made with MS Visio 2007. One has all 24mm button holes, except up which is 30mm. That ended up feeling too small for me, so there's also one where all the button holes are 30mm, which is what mine will be.
The panel is 10"x16", when you print you can print on the standard size 11"x17". A black border shows you the actual 10x16. Please note that the diagram is US Imperial, so the button sizes are approximate! If you drill, use an actual 24mm or 30mm bit. Otherwise though the center markers should line up fine (I tried really hard to make the measurements exactly match the MK configuration). Also, the directions are in comfortable position for me, you should probably print and see if it works for you.
If someone uses this let me know; I'd love to see how the controller turns out!
Attachments
-
198.6 KB Views: 131