BUG_ME

[aldazo]

Wouldn't I press the H button to swap H for Power?

H button?... Now you lost me, I was talking about the PS3 buttons: Square, Triangle, X, Circle, L1, L2, R1 and R2.

 

[CTZero]

This is how it would look if it's done correctly. Just showing this to people who haven't looked at this before...

 

[aldazo]

Hmm still can't set it up right. I just want to swap the 3 and 4 buttons. Instead all my buttons got swapped.

Wouldn't I press the H button to swap H for Power?

I guess I undertand, 3=H=Hard and 4=Power, right? If thats the case then this should be the answer:

1. Push "X" button on "BUG_Me"
2. Tap "down" 3 times (now you are on "Hard" button)
3. Push "Circle" (initial Power button) (now you are swapping "Hard" for "Power")
4. Tap "up" 5 times (now you are on "save preset") and push "X" button
5. A message will show to confirm the changes, push "X" to accept.
6. The End... I hope...apologize for the previous mess.

 

[PadWarrior]

I guess I undertand, 3=H=Hard and 4=Power, right? If thats the case then this should be the answer:

1. Push "X" button on "BUG_Me"
2. Tap "down" 3 times (now you are on "Hard" button)
3. Push "Circle" (initial Power button) (now you are swapping "Hard" for "Power")
4. Tap "up" 5 times (now you are on "save preset") and push "X" button
5. A message will show to confirm the changes, push "X" to accept.
6. The End... I hope...apologize for the previous mess.

No prob man ill give it a shot tonight finding that save button has been tough

 

[aldazo]

No prob man ill give it a shot tonight finding that save button has been tough

Hey man, it take me sometime but I finally got the right answer, this is what you have to do, 100% confirmed!
If 3=H=Hard and 4=Power, then this should be the answer:

1. Press "X" button on "BUG_Me 1"
2. Tap "down" 3 times (now you are on "Hard" option)
3. Press "Circle" (initial Power button) (now you are swapping "Hard" for "Power")...(and NOW you're on "Power" option)
4. Tap "up" 6 times (now you are on "save preset") and press "X" button
5. A message will show to confirm the changes, press "X" to accept.
6. Press "Circle" to return to the select your character.
6. The End... Finally!!!

The problem was that when you change a button the system automatically "tap down", so if you are lets say in the "Interact" option and press a button, now you will have changed the interact button BUT the cursor will be in the "Throw" option, so if you want to change again the "interact" button you will have to tap "up" on your controller and then press the desired button. This just happen when you're trying to change buttons but no when you're trying to change the other options like "release check" and "alternate control". And remember, the invisible menu looks like this:

Custom 1 (you can change it to: custom 2, custom 3, and custom 4 by tapping "right" on your controller 1,2, or 3 times respectively)
Light (you can change it by pressing any other button than the default)
Medium (you can change it by pressing any other button than the default)
Hard (you can change it by pressing any other button than the default)
Power (you can change it by pressing any other button than the default)
Interact (you can change it by pressing any other button than the default)
Throw (you can change it by pressing any other button than the default)
Flip Stance (you can change it by pressing any other button than the default)
Meter Burn (you can change it by pressing any other button than the default)
Release Check (you can desactivate by tapping "right" on your controller) (Default = Negative edge enable)
Alternate Control (you can change it by tapping "right" on your controller) (Default = No street fighter inputs)
Save preset (press X to save your changes)
Default (press X to go back to the default configuration)

The End.

 

[PadWarrior]

Hey man, it take me sometime but I finally got the right answer, this is what you have to do, 100% confirmed!
If 3=H=Hard and 4=Power, then this should be the answer:

1. Press "X" button on "BUG_Me 1"
2. Tap "down" 3 times (now you are on "Hard" option)
3. Press "Circle" (initial Power button) (now you are swapping "Hard" for "Power")...(and NOW you're on "Power" option)
4. Tap "up" 6 times (now you are on "save preset") and press "X" button
5. A message will show to confirm the changes, press "X" to accept.
6. Press "Circle" to return to the select your character.
6. The End... Finally!!!

The problem was that when you change a button the system automatically "tap down", so if you are lets say in the "Interact" option and press a button, now you will have changed the interact button BUT the cursor will be in the "Throw" option, so if you want to change again the "interact" button you will have to tap "up" on your controller and then press the desired button. This just happen when you're trying to change buttons but no when you're trying to change the other options like "release check" and "alternate control". And remember, the invisible menu looks like this:

Custom 1 (you can change it to: custom 2, custom 3, and custom 4 by tapping "right" on your controller 1,2, or 3 times respectively)
Light (you can change it by pressing any other button than the default)
Medium (you can change it by pressing any other button than the default)
Hard (you can change it by pressing any other button than the default)
Power (you can change it by pressing any other button than the default)
Interact (you can change it by pressing any other button than the default)
Throw (you can change it by pressing any other button than the default)
Flip Stance (you can change it by pressing any other button than the default)
Meter Burn (you can change it by pressing any other button than the default)
Release Check (you can desactivate by tapping "right" on your controller) (Default = Negative edge enable)
Alternate Control (you can change it by tapping "right" on your controller) (Default = No street fighter inputs)
Save preset (press X to save your changes)
Default (press X to go back to the default configuration)

The End.

Thanks man I'll give it shot. It worked!